Posts Tagged ‘tools’

Understanding A Weed Burner

Friday, September 9th, 2011

If you are into gardening then you are probably aware of one major problem we call weeds. Many gardens have fallen victims to weeds. These weeds are opportunistic despite the harmless look. Truth is, weeds are comparable to robbers. In order to thrive, they steal nutrients from plants. Even if you choose to ignore these weeds they can still survive on their own means. This is the point of making sure that you get rid of all the weeds that are growing in your garden. For your garden to bloom then you will have to eliminate these weeds. That is why before you start planting anything in your garden you have to ensure that all the weeds are killed including the roots.

Describe a weed burner? A weed burner is a specialized tool that is designed to completely kill weeds. Of course, this tool does not require the use of herbicides and other chemicals to eliminate weeds because these solutions are hazardous and considered as health hazards. On the other hand, when using a weed burner there is no need to use chemical compounds. Rather, heat is used to eliminate the weeds completely. The weed dies because the heat causes the water to evaporate from inside thus killing it.

Nonetheless, safety precautions have still to be considered even when herbicides are not used. Even without herbicides, fire and heat can still pose a danger to ones health especially if you do not use it properly. This is the reason why it is recommended to use only quality weed burners. It can be costly but together with that cost is the assurance that the risk for the product to malfunction is very low.

Every weed burner is comprised of two parts. The first part is called the tank, which holds the fuel like propane and the second part is the wand, which is the part where heat or fire comes out. Moreover, some wands have attachments that allow you to redirect fire or heat to the direction that you desire. A weed burner that comes with a backpack or a large tank is ideal because it provides you with more mobility.

Whatever you use there is always risk and this holds true to using a weed burner, thus as a solution always keep your health insurance active and updated.

In line with quality items, take time to consider hunter ceiling fans for your house. Ceiling fans from this company are said to be top of the line.

Bob Proctor has been writing articles since 2005 and is an expert on weed burner, however he’s also interested in hunter ceiling fans for personal use.

Dog Friendly 2010 Honda Element

Friday, November 6th, 2009

The Japanese automaker Honda has just cooked up a new pet friendly Element for the U.S. market. The compact crossover is well known as a go anywhere do anything kind of vehicle, the car’s resilient interior allows you to play all day at the beach, store all your surf gear inside and simply hose out all the sand when you get home. Knowing how much consumers are already spending on their animals, Honda figured that the 2010 Honda Element Dog Friendly was the next logical step to winning over, over accommodating dog owners.

Starting at only $20,525, this new Element is full of features for man’s best friend. The entire cargo area behind the rear seats has been transformed into a pooch’s traveling palace. First of all Fido will be able to effortlessly enter and exit his new perch atop the back bumper via a very sturdy looking ramp that if wide enough could handle a wheelchair. Once inside the pup will ride on a plush foam cushion covered with a neat Dog Friendly Element print. In order to keep Rex cool Honda’s Dog Friendly engineers have built in a ventilation fan and to make sure that he won’t go thirsty they have come up with a trick dog bowl that ensures minimal spillage even around the hairiest of hairpins, guaranteed to keep that extra member of your family comfortable even on the longest of car rides.

The Dog Friendly Element is powered by Honda’s reliable 2.4 Liter i-VTEC four cylinder engine and shifted with a five speed automatic transmission that can send power to either the front wheels or with Honda’s Real Time 4WD power all four. The only thing left for Honda to install is a video monitor so that the passengers can check on the family pet while he is riding in his kennel on wheels. If you have any doubts about how safe this setup is you can rest assured that Honda has chosen the Takata Corporation to design the whole thing. Now you might be asking why is that name so familiar, if you have ever seen a racecar driver strapped in with a really cool looking green racing harness, those are Takatas.

The Honda Element lineup expands for the 2010 model year with an all-new “Dog Friendly” pet accommodation system designed to improve safety, comfort and convenience for dogs and their owners alike, American Honda Motor Co., Inc., announced today. The 2010 Honda Element arrives at dealerships nationwide by mid-October. The Dog Friendly Element is set to become available on November 16.

“The Honda Element has long been recognized as an accommodating vehicle for people with active lifestyles involving sports and hobbies,” said Vicki Poponi, assistant vice president of Product Planning for American Honda. “The new Dog Friendly Element takes that concept to a whole new level with specially designed features for dogs and their owners.”

Engineered to integrate with factory precision into the Element EX, the Dog Friendly equipment is intended to accommodate the secure transportation of a dog in the cargo area within a nylon-webbed car kennel. In daily operation the car kennel helps prevent a dog from interfering with the driver in traffic by keeping the pet properly restrained and out of reach of the driver. In the event of a frontal collision, the kennel is intended to help restrain the dog behind the rear seats, reducing the chance for the pet to be injured - or to injure human occupants during a crash.

The Dog Friendly equipment enhances pet comfort by providing a soft floor surface for the dog’s legs and paws along with a dedicated fan and a s–resistant water source. Convenience is improved for owners with an integrated ramp, easy to clean surfaces and a full suite of matching Dog Friendly accoutrements.

Check Cristian Truers’s new auto cars buying guide for more information, or see his good auto cars tips.

2010 Hurst/camaro Performance Series

Sunday, November 1st, 2009

We are more accustomed to hearing about the classic American tuners from Hurst Performance creating special edition Challengers and Mustangs, however they have teamed up with Chevrolet to auction off the very first preproduction HURST/Camaro on eBay prior to the 2009 SEMA show in order to fund the SEMA Memorial Scholarship Fund.

Now the auction is already under way, and aside from this 445 HP stunning silver and black pony car, the highest bidder will also walk away with a very special SEMA experience prize package. The package includes two tickets to the show, a two night stay at the Las Vegas Hilton, $1000 worth of American Airlines flight vouchers to get you there and a pair of passes to the eBay party at the Bellagio while in Sin City. The winning bid will ensure that the SEMA Memorial Scholarship Fund, a program that fosters industry leadership by supporting the education of students pursuing careers in the automotive aftermarket, continues on.

As if the trip of a lifetime to Las Vegas isn’t enticing enough, the HURST/Camaro comes complete with plenty of goodies of its own, like a set of 20 inch forged aluminum HURST T-2 wheels, a Hurst Competition Plus short throw pistol grip shifter and a Hurst AIRSPEED rear deck spoiler to complete the aerodynamic modifications. The modified muscle car rides on an aftermarket Eibach suspension to give the Camaro just the right stance, while a Magnaflow stainless steel performance exhaust gives the HURST/Camaro a much more aggressive bark to match the car’s bad boy livery.

SEMA, in cooperation with General Motors and Hurst Performance Vehicles, announced today that it will auction the first pre-production HURST/Camaro prior to the 2009 SEMA Show. The proceeds are to benefit the SEMA Memorial Scholarship Fund, a program that fosters industry leadership by supporting the education of students pursuing careers in the automotive aftermarket.

The car will be auctioned on eBay Motors during the two weeks prior to the show. “SEMA has a wonderful history of supporting our industry through scholarships made to deserving students,” said Scooter Brothers, Chairman of the SEMA Scholarship Committee. “The SEMA Scholarship Committee is delighted that Hurst Performance, along with GM, is making this generous donation with this one-of-a-kind HURST/Camaro. We look forward to a very successful auction culminating at the SEMA Show this November.”

“We are thrilled to be able to support the SEMA Scholarship Fund by contributing this very special Camaro,” said Bob Kern, General Motors SEMA Relations Manager. “GM is very committed to growing this industry and we are certainly dedicated to be part of a program that helps enrich the lives of so many young, aspiring automotive scholars.

Check Cristian Truers’s new auto cars buying guide for more information, or visit his valuable auto cars tips.

1985 Ford Bronco Ii Xlt

Sunday, November 1st, 2009

“The ugly duckling. It may be rusty, but it runs better than most newer cars” What things have gone wrong with the car? Headliner falling down.

Driver seat a little twisted and ripped.

Engine valve noise, probably from driving 388,000 KMs.

Fenders and rear quarters rusted as well as other rust spots and peeling paint.

Speakers blown, but still work OK.

Valve cover leak and minor power steering hose leak.

General comments? Bought the truck for $500 and drove it 143 KMs home, and was surprised at how well it was running, and how well it rode for being a rusted cheap Bronco II.

The body is ugly brown on tan with a shade of rust, but still solid. Most of it is just surface rust.

4X4 works great, the manual transmission shifts good, and the clutch seems to be fine.

Heat works amazingly well, and surprisingly so does the A/C.

Handles bumps really well, and you do feel them, but you feel them in most true 44 offroad vehicles.

Carburated engine starts up quick, like as soon as the key hits the start position, it’s running, and very quiet and smooth, you can barely hear or feel the engine running except for the minor valve tick.

I definitely need to put in a tachometer in it so I know it’s running, because it’s so quiet that every time you get to a stop sign or traffic lights and push the clutch in, everything is quiet and it seems like the engine stalled, but it’s still running quiet and smooth.

I am very happy with this vehicle so far, even though it has 388,000 KMs. I would have no problem fixing up the body a little bit to get rid of most of the rust, and if I ever had to replace the engine or transmission, I would, but the way it seems right now, I almost think it would last another 300,000 KMs.

Check Cristian Truers’s new auto cars buying guide for more information, or see his valuable auto cars tips.

2010 Lotus Exige Scura

Friday, October 30th, 2009

While a majority of automakers are bailing out of the Tokyo Motor Show, it is nice to see that there will indeed be a few new models to look at when it comes to be show time. One such vehicle will be a special edition sports car from he light weight English race car builders at Lotus. While the boffins from across the pond have already engineered every unnecessary ounce out of the Exige in the hopes of creating a hard core driving experience, this particularly dark model focuses on making the little Lotus as sinister looking as it is lethal. The special edition Tokyo Motor Show Lotus Exige is named the Scura, which is the Italian word for dark, due to its dramatic black bodywork and a GT3 inspired rear end.

Priced at around $75,000 the Exige Scura features a trio of Phantom Black stripes to break up the large panels of matte black paint, however the carbon fiber bits and suede wrapped racing buckets go a bit further towards showing off the Scura’s true purpose of being an all out competition vehicle. Only now instead of laughing at bright orange bodywork, other drivers will stay out of this Lotus’ way. Like all Exige models the Scura is powered by a supercharged four cylinder engine that delivers a maximum output of 257 HP 174 lb-ft of torque, while it can sprint from 0 to 60 MPH in only 4 seconds and reach a top speed of 152 MPH.

Lotus Cars unveils its latest special edition - the Exige Scura, so called due to its dramatic matt black and carbon fibre theme, at the Tokyo International Motorshow on 21st of October 2009.

Translated as ‘dark’ from Italian, the name ‘Scura’ reflects the stealth character of this already fierce looking Lotus and its stunning soft-feel matt black paint finish. Limited to just 35 cars globally, this Exige evokes a desire to ‘indulge your dark side’. This is a serious looking car and enhancements to performance and a reduction in weight from the production level Exige S means that the Exige Scura demands to be driven by a serious driver.

Contrasting high gloss ‘Phantom Black’ triple stripes run the length of the car and a carbon fibre front splitter, oil cooler inlet vanes, side airscoops and rear spoiler enhance the stunning distinction between the different textures and exaggerate the tactile quality of the velvety touch to the matt black paint finish.

Luke Bennett, Director of Lotus Cars said, “The Exige Scura is a stunning vehicle which offers an adrenaline fuelled experience and is a real head-turner! Our Exige customers choose Lotus because we deliver thrilling performance and dynamic design and this special edition fits the bill on both counts.

Check Cristian Truers’s new auto cars buying guide for more information, or visit his valuable auto cars tips.

categories: cars,vehicles,auto,help,blogs,education,advice,hobbies,free,tools,insurance,racing,sports

How You Can Drift A Car?

Sunday, August 30th, 2009

Step 1 Set a plastic trash can up in the center of an empty parking lot. You want enough room to approach, circle the can in a drift and then pull out of the turn. Make sure there won’t be any random shoppers appearing and wanting to leave their cars there.

Step 2 Drive towards the rubbish can and keeping to the right, make a 180-degree turn around the can, drive away from the can in the same instruction that you drove towards it. Note in your mind the point at which this is at.

Step 3 Drive toward the can again, maintaining a speed of 20 to 25 mph and begin to make the same turn. As soon as you feel the weight of the car begin to shift into the turn, engage the parking brake (literally yank it up and on as fast as you can) and apply slight pressure to the gas pedal, just enough to maintain your speed. Hold your steering wheel steady as you begin to drift into and around the can.

Step 4 Release the parking brake when you begin to feel the weight of the car shift to the outside of the turn. Give your car a little more gas while steering into the direction of the drift (away from the can) until the car catches and you are driving away from the can in the same direction as you drove toward it.

Step 5 Repeat Steps 3 and 4, adjusting your timing for engaging the parking brake and releasing it and learning just how much gas to give your car to control the speed of the drift. When you are comfortable with your ability, repeat Steps 3 and 4 again, only begin to increase your speed each time until you can comfortably handle a drift at 45 mph.

So good look trying to drift, but remember that is very dangerous, and i should suggest that you drive with someone more experienced! And please make sure that you are able to take responsibility for your actions! Take Care Cristian Truers!

About the Author:

Cars And Future

Friday, August 28th, 2009

The biggest change will be that cars themselves will be electric-powered, diluting the meaning of the word “automotive electronics.” It’s not that electricity or software will change cars but that cars themselves will become electricity, so to speak.

In other words, cars will be linked to electric force systems in the future. And it is becoming more and more probable that gasoline vehicles will change into hybrid and plug-in hybrid cars, and then into pure electric cars.

Of course, there are other possibilities like clean diesel cars and bio fuel cars though fuel-cell vehicles exist to the side of them, I would say. But trains proved one hundred years ago that electric motors are better actuators for conveyances if there is enough infrastructure to supply electricity.

When viewed in this light, the trend shifting from hybrid cars to plug-in hybrid cars and to pure electric cars is becoming more and more prominent. This trend will become even stronger after the G8 Hokkaido-Toyako Summit though it is also being influenced by soring oil price.

When cars are linked to electric force systems, their characteristics will change. I mean, they will be charged with a tiny amount of electricity at a time and will be charged more often. In other words, they will become like trains.

What’s the difference between trains and cars? Trains move while being supplied with energy from outside. And cars run carrying most of the energy they need.

Currently, cars run 400-500km (250-313 miles) on a single fueling and at a maximum speed of 160km (100 miles) per hour because auto makers have made efforts to develop cars that can be used anytime, anywhere and by anyone.

However, do all cars really have to have those capabilities? Considering how they are used in reality, I think many people would be satisfied with cars that can run 20km (13 miles) a day and at a maximum speed of 100km (63 miles) per hour.

The travel distance of 400-500km is long enough to drive in the middle of the Sahara desert. It does not make sense to use that kind of car in urban areas.

When I chat about a automobile that can store tiny energy, people frequently request me, ‘what will you do whether it runs out of energy?’ But, how numerous people drive to the areas where they cannot recharge their cars until the cars stop? We only need cars that meet our needs.

About the Author:

Auto Body Repair Shop: Find Everything You Need To Know

Friday, July 24th, 2009

Your car costs you a lot of money and you depend on it to get you where you want and need to go. So, if something were to happen to it, you want to make sure that it is in the best hands possible. Choosing an auto body shop that will produce quality work is hard and takes time. You would not trust just anyone with your kids, why trust just anyone with your car. A car is for the most part replaceable, however if you spent money on it, and time to get it how you want you don’t want someone doing work on it who does produce that best quality work possible. Find an auto body shop that produces quality work to repair your vehicle.

Quality a degree or grade of excellence or worth. Something can be of good or bad quality. You want something that is of good quality for your car. Most car owners want their car to stay looking nice for a long time to come, especially since much more expensive than a new pair of shoes. Sometimes blemishes on your car are unavoidable and others are simply mistakes. The important part is that you take it to an auto body shop that will produce a good quality job for your car.

The other place that you might want to check out will be body shops in general. A body shop might have what you are looking for if it is body work that you need to do yourself.

Someone should stay far away from shops that don’t have a good word about them. Don’t be drawn to a shop just because of its big sign. So instead seek out other knowledge of experts who know of master body shops.

Next you want to see if they have any form of certifications for auto body repairs. You want to know that they have been properly trained on the best methods for repairing your vehicle. A certification can show that they are recognized as being qualified to perform auto body repairs.

When you go to a junk yard or if you have already been to one you will be amazed at how many cars you will see when you first get there. The whole point to a junk yard is that they bring the broke or junk car to the junk yard and then they just sell the parts out of the cars to make extra money to run the junk yard. So if you are ever looking for spare parts for a car you may just find yourself needing to visit a junk yard.

Then you should find out if they back up their work somehow. Do they offer any kind of warranty or guarantee on their work. If they do offer some sort of guarantee then that shows they have confidence that their work is of good quality and if there is an issue they will personally fix the problem.

Finding the best auto reconditioning shop will take you a little time but is well worth it in the end, when your car is looking great!

About the Author:

Auto Collision Repair Shop: Build A Relationship With Mechanics

Friday, July 24th, 2009

One of the very first things you should think about when choosing a Collision shop is, “How much experience does the shop have?” It’s not enough to know how many years a shop has been in business, but it’s a good place to start. You should also take into account the extreme climate here in Monroe County, and the extra experience required to deal with the damage road salt can cause.

Make sure you ask the manager, and then follow up with “How much experience do your technicians have?” That’s the really important question, because you want to know that the folks who will actually be working on your car or truck, repairing the sheet metal, straightening the frame, and painting the body panels really know what they are doing. Experience, as they say, truly is the best teacher.

I have found that, here in the Flower City, the average experience of body shop techs is slightly over seven years, and rookies are few and far between right now. That means you are quite likely to find a shop with experienced techs, if you just take the time to look around.

Dark dank body shops are a thing of the past, although you may come across one down some back alley somewhere. Today though, the majority of body shops are clean, airy, quality tools on show with clean working environments. Having said this, you still have to ensure that even though everything looks smart and clean, at the end of the day, it is the work that matters.

Most of today’s body shops are very clean, neat and very well lit. These are usually the ones at the top end of the scale. It is normal for a well run body shop to have different areas of work designated.

If the manager can’t or won’t tell you how long his techs have been working there, it may be best to move on to another auto body repair shop. Body shop technicians seem to stay longer at one shop than in many areas of the country. This stability adds up to valuable experience for you.

This is when maybe you should ask to see any finished vehicles in the body shop to check the painters work before leaving your vehicle and any money is spent. The things to look for are, smooth finishes that have very few dust specs and ensure the colors match from one panel to another. These are evidence of a quality paint spray done by a professional.

The final stage for the vehicle is the area for final assembly where the trim is re-attached, after which the car will be thoroughly cleaned and readied for you to collect or be delivered. If you have a body shop in mind or have had one recommended then ask for a tour around their facilities. Most good body shops will be more than happy to oblige. If not, then beware.

About the Author:

Auto Collision Repair Shop: Don’t Worry About Your Accident

Thursday, July 23rd, 2009

Get any form of work done to your vehicle is usually a little bit stressful. You will have to spend time and money to get your car in great shape, which are two things many of us don’t have a lot of.

Also you want to be assured that you are getting quality workmanship done for your vehicle. Getting any form of paint work done to your car falls directly into what is mentioned above. You want to make sure that it comes out looking great and stays looking great!

When choosing a repair shop to handle any paint repairs or paint touch up you want to make sure that you first of all choose a qualified professional at a well known auto body shop. Check around and do some research so that you know they are not planning to rip you off or that they in fact do a good job. You should also ask to see an example of the work that they produce from their shop. Once you do that you should be off to a good start.

That way you will not leave anything out and you will get a more accurate quote. You may also get a notepad and write down information from each shop that you speak to, if they do not print the information for you. That way you will not forget which shop you already spoke to and what each shop has to offer and their prices.

One way that you can get quotes is by calling auto body shops in your area. This can help you to get around a bout idea of how much your repairs will cost. You can also speak to them about additional services they offer. It would be great if you could get all the work you want done in one place.

Next you should look for an auto body shop that will give you a warranty on the paint job that paid for. That paint job is going to cost you some time and money and you want to get a guarantee that it is a quality job that will hold up against the elements. Any shop that provided a warranty for their work must have confidence that their work is of good quality.

So, since many people are looking for a “green” change for the environment many businesses are taking the opportunity to help out and “go green”. So, if you want to do your part you can choose to conduct business with those that are making the effort to reduce their affects on the environment in a harmful way. After all, we all want our children to be able to grow up on a great planet with less harmful emissions to the environment.

So, make sure you really check around and get the most qualified specialist and a great price as well. Oh yes, you should not be paying for all those quotes either!!!

About the Author: